Food Readme

– Seasoning your griddle helps prevent food from sticking and adds flavor to meals.
– Seasoning creates a blackened, stick-resistant coating on the griddle plate.
– You will need a bucket filled with water, Blackstone Griddle Seasoning & Cast Iron Conditioner, heat-resistant gloves or tongs, paper towels, salt, soap powder, and a stick.
– Before seasoning, clean the griddle with soapy water.
– Pre-heat the griddle and let it darken for 10-15 minutes.
– Use a thin layer of oil during the seasoning process to create a durable surface.
– Using too much oil can lead to chipping and sticky residue.
– It is recommended to use the Blackstone Griddle Seasoning & Cast Iron Conditioner.
– To season a Blackstone griddle, clean the surface with soapy water, rinse, and dry.
– Preheat the griddle on high heat for 10-15 minutes.
– Turn off the heat and let the griddle cool slightly.
– While warm, add a thin layer of oil to the surface, such as Blackstone Cast Iron Conditioner, flaxseed oil, vegetable oil, canola oil, avocado oil, or extra virgin olive oil.
– Use a paper towel to spread the oil evenly across the griddle plate.
– Turn the heat back on and let the griddle heat up until it starts smoking.
– Repeat this process 2-3 times for a dark surface.
– Wipe off any excess oil once the griddle has cooled completely.
– A Blackstone griddle does not come pre-seasoned, but has a factory finished coating that needs to be cleaned off before seasoning.
– Use oil and a towel to gently wipe off the surface after preheating.
– Flaxseed oil is the best oil for seasoning a Blackstone griddle.
– Re-season the griddle when food starts sticking or the surface appearance changes.
– If the griddle becomes discolored or rusty, it may be time to re-season.
– Do a water test by sprinkling drops of water onto the surface to determine if the seasoning layer is intact.
– Cleaning and drying the griddle surface is essential for maintaining its longevity and performance.
– Scrape off any food residue while the griddle is still warm and then wipe it with paper towels once it has cooled down.
– The seasoning process for a Blackstone griddle typically takes about an hour and involves cleaning the griddle with soap and water, drying it completely, applying a thin coat of oil evenly, and then heating the griddle to a high temperature to allow the oil to smoke and oxidize.
– Repeat the seasoning process multiple times to build up a new seasoning layer.
– Mild soap and water can be used sparingly to clean the griddle, but avoid removing the griddle seasoning.
– Butter is not recommended for Blackstone griddle seasoning; instead, high smoke point oils like flaxseed or vegetable oil or Blackstone oil conditioner should be used.
– If the griddle starts to rust, a mixture of salt, soap powder, and water can be used to scrub off the rust, followed by re-seasoning with a thin layer of oil.
– The time it takes to season a Blackstone griddle depends on the care of the surface in between cooks after the initial seasoning process.